Metabolic and elemental profiling as potential discriminating features among the black mahlab seeds (Monechma ciliatum) grown in three different regions.

INTRODUCTION: Black mahlab (Monechma ciliatum) seed is a rich source of metabolites and minerals and is usually believed to have a similar composition between different areas of cultivation. Until now, no studies have assessed changes in black mahlab seeds (BMSs) to determine those constituents that help to discriminate them according to geographical origin. OBJECTIVES: The present study attempted to compare the metabolomics and elemental profiles of BMSs of different geographical origins and identified the potential markers using ultrahigh-performance liquid chromatography quadrupole Orbitrap tandem mass spectrometry (UHPLC-Q-Orbitrap-MS2 ), and inductively coupled plasma mass spectrometry (ICP-MS) techniques and established the chemometric model to identify the potential markers and discriminate them according to cultivation sites. MATERIAL AND METHODS: In this work, data from metabolites analysis by UHPLC-Q-Orbitrap-MS2 and multi-elemental data obtained from ICP-MS were combined with chemometrics for tracing the geographical origin of BMSs. Principal component analysis (PCA) was used to evaluate the overall grouping of samples. In contrast, partial least squares-discriminant analysis (PLS-DA) and orthogonal partial least squares discriminant analysis (OPLS-DA) were employed for authentication. RESULTS: PLS-DA and OPLS-DA models were fully validated (R2 Y and Q2 values > 0.5). Variable importance of various projections was applied to obtain valuable data about differential elements (seven markers were identified) and metabolites (23 markers were identified) with high discrimination potential. The outcomes presented in this study serve as an appropriate framework for developing novel discrimination approaches in food origin screening.

Exploring the Chemical Constituents and Nutritive Potential of Bee Drone (Apilarnil): Emphasis on Antioxidant Properties.

A lesser-known bee product called drone brood homogenate (DBH, apilarnil) has recently attracted scientific interest for its chemical and biological properties. It contains pharmacologically active compounds that may have neuroprotective, antioxidant, fertility-enhancing, and antiviral effects. Unlike other bee products, the chemical composition of bee drone larva is poorly studied. This study analyzed the chemical compostion of apilarnil using several methods. These included liquid chromatography-mass spectrometry (LC-MS/MS) and a combination of gas chromatography/mass spectrometry with solid phase micro-extraction (SPME/GC-MS). Additionally, antioxidant activity of the apilarnil was assessed using 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. A chemical assessment of apilarnil showed that it has 6.3±0.00, 74.67±0.10 %, 3.65±0.32 %, 8.80±1.01 %, 13.16±0.94 %, and 8.79±0.49 % of pH, moisture, total lipids, proteins, flavonoids, and carbohydrates, respectively. LC-MS/MS analysis and molecular networking (GNPS) of apilarnil exhibited 44 compounds, including fatty acids, flavonoids, glycerophospholipids, alcohols, sugars, amino acids, and steroids. GC-MS detected 30 volatile compounds in apilarnil, mainly esters (24 %), ketones (23.84 %), ethers (15.05 %), alcohols (11.41 %), fatty acids (10.06), aldehydes (6.73 %), amines (5.46), and alkene (5.53 %). The antioxidant activity of apilarnil was measured using DPPH with an IC50 of 179.93±2.46 µg/ml.

Berry wax improves the physico-mechanical, thermal, water barrier properties and biodegradable potential of chitosan food packaging film.

Chitosan (CT) is extensively applied in developing food packaging films due to its non-toxic, biodegradable, and good film-forming properties. But CT-based single polymer film has issues with poor physico-mechanical, thermal, and light barrier properties. Therefore, this study aimed to incorporate natural berry wax (BYW) at various concentrations (5 %, 10 %, 15 %, 20 %, and 25 %, wt%) into CT to improve the quality characteristics of CT film. The microstructure of the film matrix was effectively proven to be compatible with BYW through the utilization of SEM, XRD, and FTIR spectroscopy. The results demonstrated that the quality parameters of CT/BYW composite film were significantly affected by the increasing concentration of BYW. The integration of BYW with a concentration of 5 % to 20 % to CT substantially improved the film characteristics by reducing moisture content, swelling power, solubility, and water vapor permeability, increasing the film's opacity, thermal stability, and tensile strength as well as enhancing the biodegradable potential. Furthermore, CT/BYW films showed higher thermal stability and UV and visible light resistance compared to pure CT film. Taken together, the CT film with 20 % berry wax showed the best film characteristics and biodegradable potential, which could be promising for enhancing the shelf-life of various food products.

Modulating hydrophilic properties of ß-cyclodextrin/carboxymethyl cellulose colloid particles to stabilize Pickering emulsions for food 3D printing.

This research investigated edible Pickering emulsions stabilized by polysaccharide complexes as inks for food 3D printing. The interface membrane structure in the Pickering emulsion system was formed using complexes consisting of ß-cyclodextrin (ß-CD) and carboxymethyl cellulose (CMC). Except for provide sufficient steric barrier and electrostatic repulsion to increase the stability of the Pickering emulsions, the interface membrane constructs also can demonstrate good biphasic wettability and lower oil/water interfacial tension. The hydrophilicity of complexes (ß-CD/CMC) was mainly adjusted by the ratio of ß-CD/CMC (Rß/C) and the substitution degree (DS) of CMC, which further adjusted the physical and chemical properties of Pickering emulsion to make it correspond to the rheological behavior applied to 3D printing. The stable Pickering emulsion (Rß/C = 2:2, DS = 1.2, weight ratio of oil phase (φ) = 65 %) displayed excellent printing potential by characterizations analysis of Pickering emulsions. The smoothness, viscosity, and self-supporting ability of the Pickering emulsion under the optimized conditions were further analyzed using a filling density printing experiment of a cuboid model. The emulsifying properties of ß-CD were adjusted by hydrophilic CMC to achieve the required amphipathic properties of the complexes to develop Pickering emulsions for food 3D printing.

A visual bi-layer indicator based on mulberry anthocyanins with high stability for monitoring Chinese mitten crab freshness.

In this study, a bilayer film (BIF) was fabricated to improve the stability of an anthocyanin-based freshness indicator film. The sensor layer consists of gellan gum (GG) and mulberry anthocyanin (MAE) for freshness indication. The oxygen barrier layer was constructed from chitosan (CS), polyvinyl alcohol (PVA), sodium alginate (SA), and pullulan (Pu) to the protection of MAE from oxidation. The highest antioxidant activity of BIF was 91.28 %. BIF was used to monitor the Chinese mitten crab freshness. The total volatile basic nitrogen (TVB-N) level was increased to 31.23 mg/100 g on day 8, and the color of the indicator presented a visible change from pink to dark green. The acquired results revealed a good correlation between TVB-N, pH, and color change of the indicator. The research indicated that the BIF was applied for freshness monitoring of Chinese mitten crab and displayed significant color changes that would be effective in commercial environments.

Smart films of carbohydrate-based/sunflower wax/purple Chinese cabbage anthocyanins: A biomarker of chicken freshness.

Innovative pH-colorimetric sensor film was fabricated from agar and methylcellulose matrix (AM) with various concentrations of sunflower wax (SFW) (6%, 9%, 12%, and 15% w/w) combined with purple Chinese cabbage (CPC) anthocyanins for tracking chicken breast freshness. A bio-composition film AM/CPC with (hydrophobic) SFW exhibited significant color variations in acidic pH level of (2-6) and a slight shift in alkaline pH levels ranging from (7-12), as well as marked color change due to ammonia vapor. Microstructure analyses revealed that SFW was fixed effectively into the AM-CPC matrices. The incorporation of varying SFW concentrations enhanced the mechanical, thermal, antioxidant activity, reduced anthocyanin release and physical properties (mainly water vapor permeability), with the best performance at AM/CPC/9% SFW. Interestingly, SFW films demonstrated perfect defense opposing UV-vis and visible light. Finally, it was proved that the efficiency of the pH-colorimetric film as an indicator for evaluating the freshness of chicken breast.

Saudi Arabian Plants: A Powerful Weapon against a Plethora of Diseases.

The kingdom of Saudi Arabia (SA) ranks fifth in Asia in terms of area. It features broad biodiversity, including interesting flora, and was the historical origin of Islam. It is endowed with a large variety of plants, including many herbs, shrubs, and trees. Many of these plants have a long history of use in traditional medicine. The aim of this review is to evaluate the present knowledge on the plants growing in SA regarding their pharmacological and biological activities and the identification of their bioactive compounds to determine which plants could be of interest for further studies. A systematic summary of the plants' history, distribution, various pharmacological activities, bioactive compounds, and clinical trials are presented in this paper to facilitate future exploration of their therapeutic potential. The literature was obtained from several scientific search engines, including Sci-Finder, PubMed, Web of Science, Google Scholar, Scopus, MDPI, Wiley publications, and Springer Link. Plant names and their synonyms were validated by 'The Plant List' on 1 October 2021. SA is home to approximately 2247 plant species, including native and introduced plants that belong to 142 families and 837 genera. It shares the flora of three continents, with many unique features due to its extreme climate and geographical and geological conditions. As plants remain the leading supplier of new therapeutic agents to treat various ailments, Saudi Arabian plants may play a significant role in the fight against cancer, inflammation, and antibiotic-resistant bacteria. To date, 102 active compounds have been identified in plants from different sites in SA. Plants from the western and southwestern regions have been evaluated for various biological activities, including antioxidant, anti-cancer, antimicrobial, antimalarial, anti-inflammatory, anti-glycation, and cytotoxic activities. The aerial parts of the plants, especially the leaves, have yielded most of the bioactive compounds. Most bioactivity tests involve in vitro assessments for the inhibition of the growth of tumour cell lines, and several compounds with in vitro antitumour activity have been reported. More in-depth studies to evaluate the mode of action of the compounds are necessary to pave the way for clinical trials. Ecological and taxonomical studies are needed to evaluate the flora of SA, and a plan for the conservation of wild plants should be implemented, including the management of the protection of endemic plants.

Chemistry and the Potential Antiviral, Anticancer, and Anti-Inflammatory Activities of Cardiotonic Steroids Derived from Toads.

Cardiotonic steroids (CTS) were first documented by ancient Egyptians more than 3000 years ago. Cardiotonic steroids are a group of steroid hormones that circulate in the blood of amphibians and toads and can also be extracted from natural products such as plants, herbs, and marines. It is well known that cardiotonic steroids reveal effects against congestive heart failure and atrial fibrillation; therefore, the term "cardiotonic" has been coined. Cardiotonic steroids are divided into two distinct groups: cardenolides (plant-derived) and bufadienolides (mainly of animal origin). Cardenolides have an unsaturated five-membered lactone ring attached to the steroid nucleus at position 17; bufadienolides have a doubly unsaturated six-membered lactone ring. Cancer is a leading cause of mortality in humans all over the world. In 2040, the global cancer load is expected to be 28.4 million cases, which would be a 47% increase from 2020. Moreover, viruses and inflammations also have a very nebative impact on human health and lead to mortality. In the current review, we focus on the chemistry, antiviral and anti-cancer activities of cardiotonic steroids from the naturally derived (toads) venom to combat these chronic devastating health problems. The databases of different research engines (Google Scholar, PubMed, Science Direct, and Sci-Finder) were screened using different combinations of the following terms: "cardiotonic steroids", "anti-inflammatory", "antiviral", "anticancer", "toad venom", "bufadienolides", and "poison chemical composition". Various cardiotonic steroids were isolated from diverse toad species and exhibited superior anti-inflammatory, anticancer, and antiviral activities in in vivo and in vitro models such as marinobufagenin, gammabufotalin, resibufogenin, and bufalin. These steroids are especially difficult to identify. However, several compounds and their bioactivities were identified by using different molecular and biotechnological techniques. Biotechnology is a new tool to fully or partially generate upscaled quantities of natural products, which are otherwise only available at trace amounts in organisms.

Smart films fabricated from natural pigments for measurement of total volatile basic nitrogen (TVB-N) content of meat for freshness evaluation: A systematic review.

Major databases were searched from January 2012 to August 2021 and 54 eligible studies were included in the meta-analysis to estimate the overall mean of total volatile basic nitrogen (TVB-N) in meat. The mean of TVB-N was 24.96 mg/100 g (95 % CI:23.10-26.82). The pooled estimate of naphthoquinone, curcumin, anthocyanins, alizarin and betalains were 25.98 mg/100 g (95 %CI:19.63-32.33), 30.03 mg/100 g (95 %CI: 24.15-35.91), 24.92 mg/100 g (95 %CI: 22.55-27.30), 23.37 mg/100 g (95 %CI:19.42-27.33) and 19.50 mg/100 g (95 %CI:17.87-21.12), respectively. Meanwhile, subgroups based on meat types showed that smart film was most used in aquatic products at 27.19 mg/100 g (95 %CI:24.97-29.42), followed by red meat at 19.69 mg/100 g (95 %CI:17.44-21.94). Furthermore, 4 °C was the most storage temperature used for testing the performance of smart films at 25.48 mg/100 g (95 %CI:23.05-27.90), followed by storage at 25 °C of 25.65 mg/100 g (95 %CI:22.17-29.13). Substantial heterogeneity was found across the eligible studies (I2 = 99 %, p = 0.00). The results of the trim-and-fill method demonstrated publication bias was well controlled.

Recent trends in the micro-encapsulation of plant-derived compounds and their specific application in meat as antioxidants and antimicrobials.

The controversy around synthetic antioxidants and antimicrobials, which have been linked to major health problems, has driven both consumers and producers toward the usage of natural preservatives. Plants are excellent sources of bioactive compounds that can be used as part of raw materials during meat processing. Therefore, exploitation of plant-derived antioxidants is necessary to protect against microbial growth and to extend the self-life of meat. However, certain limitations, such as a strong organoleptic effect owing to the bitterness and acerbic taste, instability, and short shelf life of some plant bioactive compounds, limit their use in the meat system. Encapsulation is a novel and promising technique for overcoming these limitations. It protects bioactive compounds by strengthening their oxidative stability and by controlling the release of targeted compounds. Indeed, this review article provides recent advancements in the encapsulation of plant-derived compounds and their specific application in meat preservation.

Rapid Detection of Carbendazim Residue in Apple Using Surface-Enhanced Raman Scattering and Coupled Chemometric Algorithm.

In order to achieve rapid and precise quantification detection of carbendazim residues, surface-enhanced Raman spectroscopy (SERS) combined with variable selected regression methods were developed. A higher sensitivity and greater density of "hot spots" in three-dimensional (3D) SERS substrates based on silver nanoparticles compound polyacrylonitrile (Ag-NPs @PAN) nanohump arrays were fabricated to capture and amplify the SERS signal of carbendazim. Four Raman spectral variable selection regression models were established and comparatively assessed. The results showed that the bootstrapping soft shrinkage-partial least squares (BOSS-PLS) method achieved the best predictive capacity after variable selection, and the final BOSS-PLS model has the correlation coefficient (RP) of 0.992. Then, this method used to detect the carbendazim residue in apple samples; the recoveries were 86~116%, and relative standard deviation (RSD) is less than 10%. The 3D SERS substrates combined with the BOSS-PLS algorithm can deliver a simple and accurate method for trace detection of carbendazim residues in apples.

Development and characterization of sodium alginate/tea tree essential oil nanoemulsion active film containing TiO2 nanoparticles for banana packaging.

To improve the postharvest quality and reduce the anthracnose of bananas, the sodium alginate (SA)/tea tree essential oil nanoemulsion (TEON) based bilayer films incorporated with different contents of TiO2 nanoparticles were fabricated in this work. The developed TEON presented satisfactory DPPH scavenging activity (65.5 ± 1.8%) and antifungal capability (90.5 ± 5.8%). The microscopy images of the cross-section of the films indicated that the bilayer films with well-cross-linked were developed successfully. Notably, the addition of a certain content of TiO2 to SA greatly improved the UV blocking and water vapor and oxygen barrier properties of the developed film. However, the barrier property of the film was decreased when the TiO2 content further increased to 4.0 mg/100 mg of SA. The retention of TEO under visible and UV light in the bilayer film was respectively prolonged to 24 days and 32 h when the addition of TiO2 content was 2.0 mg/100 mg of SA. Finally, the postharvest quality and anthracnose of banana fruits were significantly improved by SA-TiO2 + SA-TEON film-forming solution treatments. Results from the present work might open up new insights into the approaches of postharvest quality improvement of bananas.

The use of analytical techniques coupled with chemometrics for tracing the geographical origin of oils: A systematic review (2013-2020).

The global market for imported, high-quality priced foods has grown dramatically in the last decade, as consumers become more conscious of food originating from around the world. Many countries require the origin label of food to protect consumers need about true characteristics and origin. Regulatory authorities are looking for an extended and updated list of the analytical techniques for verification of authentic oils and to support law implementation. This review aims to introduce the efforts made using various analytical tools in combination with the multivariate analysis for the verification of the geographical origin of oils. The popular analytical tools have been discussed, and scientometric assessment that underlines research trends in geographical authentication and preferred journals used for dissemination has been indicated. Overall, we believe this article will be a good guideline for food industries and food quality control authority to assist in the selection of appropriate methods to authenticate oils.

Discrimination of rice varieties using smartphone-based colorimetric sensor arrays and gas chromatography techniques.

A smartphone-based colorimetric sensor array system was established for discrimination of rice varieties having different geographical origins. Purposely, aroma profiling of nine rice varieties was performed using solid-phase microextraction gas chromatography-mass spectrometry. Alcohols, aldehydes, alkanes, ketones, heterocyclic compounds, and organic acids represent the abundant compounds. Colorimetric sensor array system produced a characteristic color difference map upon its exposure to volatile compounds of rice. Discrimination of rice varieties was subsequently achieved using principal component analysis, hierarchical clustering analysis, and k-nearest neighbors. Rice varieties from same geographical source were clustered together in the scatter plot of principal component analysis and hierarchical clustering analysis dendrogram. The k-nearest neighbors algorithm delivered optimal results with discrimination rate of 100% for both calibration and prediction sets using sensor array system. The smartphone-based colorimetric sensor array system and gas chromatography technique were able to effectively differentiate rice varieties with the advantage of being simple, rapid, and low-cost.

Cosmetic Applications of Bee Venom.

Bee venom (BV) is a typical toxin secreted by stingers of honeybee workers. BV and BV therapy have long been attractive to different cultures, with extensive studies during recent decades. Nowadays, BV is applied to combat several skin diseases, such as atopic dermatitis, acne vulgaris, alopecia, vitiligo, and psoriasis. BV is used extensively in topical preparations as cosmetics and used as dressing for wound healing, as well as in facemasks. Nevertheless, the safety of BV as a therapeutic choice has always been a concern due to the immune system reaction in some people due to BV use. The documented unfavorable impact is explained by the fact that the skin reactions to BV might expand to excessive immunological responses, including anaphylaxis, that typically resolve over numerous days. This review aims to address bee venom therapeutic uses in skin cosmetics.

Wasp Venom Biochemical Components and Their Potential in Biological Applications and Nanotechnological Interventions.

Wasps, members of the order Hymenoptera, are distributed in different parts of the world, including Brazil, Thailand, Japan, Korea, and Argentina. The lifestyles of the wasps are solitary and social. Social wasps use venom as a defensive measure to protect their colonies, whereas solitary wasps use their venom to capture prey. Chemically, wasp venom possesses a wide variety of enzymes, proteins, peptides, volatile compounds, and bioactive constituents, which include phospholipase A2, antigen 5, mastoparan, and decoralin. The bioactive constituents have anticancer, antimicrobial, and anti-inflammatory effects. However, the limited quantities of wasp venom and the scarcity of advanced strategies for the synthesis of wasp venom's bioactive compounds remain a challenge facing the effective usage of wasp venom. Solid-phase peptide synthesis is currently used to prepare wasp venom peptides and their analogs such as mastoparan, anoplin, decoralin, polybia-CP, and polydim-I. The goal of the current review is to highlight the medicinal value of the wasp venom compounds, as well as limitations and possibilities. Wasp venom could be a potential and novel natural source to develop innovative pharmaceuticals and new agents for drug discovery.

Honey Bee Products: Preclinical and Clinical Studies of Their Anti-inflammatory and Immunomodulatory Properties.

Inflammation is a defense process triggered when the body faces assaults from pathogens, toxic substances, microbial infections, or when tissue is damaged. Immune and inflammatory disorders are common pathogenic pathways that lead to the progress of various chronic diseases, such as cancer and diabetes. The overproduction of cytokines, such as interleukin (IL)-1ß, IL-6, and tumor necrosis factor-α, is an essential parameter in the clinical diagnosis of auto-inflammatory diseases. In this review, the effects of bee products have on inflammatory and autoimmune diseases are discussed with respect to the current literature. The databases of Google Scholar, PubMed, Science Direct, Sci-Finder and clinical trials were screened using different combinations of the following terms: "immunomodulatory", "anti-inflammatory", "bee products", "honey", "propolis", "royal jelly", "bee venom", "bee pollen", "bee bread", "preclinical trials", "clinical trials", and "safety". Honey bee products, including propolis, royal jelly, honey, bee venom, and bee pollen, or their bioactive chemical constituents like polyphenols, demonstrate interesting therapeutic potential in the regulation of inflammatory mediator production as per the increase of TNF-α, IL-1ß, IL-6, Il-2, and Il-7, and the decrease of reactive oxygen species (ROS) production. Additionally, improvement in the immune response via activation of B and T lymphocyte cells, both in in vitro, in vivo and in clinical studies was reported. Thus, the biological properties of bee products as anti-inflammatory, immune protective, antioxidant, anti-apoptotic, and antimicrobial agents have prompted further clinical investigation.

Effect of gum arabic edible coating incorporated with African baobab pulp extract on postharvest quality of cold stored blueberries.

The marketability of blueberries over long distances has been limited because of their highly perishability. To prolong the postharvest shelf life and conserve quality properties of blueberry, various alternatives have been evaluated. We studied the influence of gum arabic (GA) alone or GA enhanced with African baobab (AB) fruit extract on blueberry during cold storage (4 °C) for 21 days. Physico-chemical properties (e.g. pH, color, firmness, and weight loss), microbial decay, antioxidant properties, polyphenol oxidase (PPO) and peroxidase (POD) activity were investigated. The fruit treated with GA combined AB indicated a significant delay in microbial decay, firmness loss, weight loss, and color change. The treatments on blueberries resulted in better preservation of total phenols and total anthocyanins delayed the increase in total soluble solids as compared to the control. The coatings lowered the activities of PPO and POD enzymes and delayed microbial decay in coated blueberry during 21 days of storage.

A low cost smart system to analyze different types of edible Bird's nest adulteration based on colorimetric sensor array.

This study was performed to develop a low-cost smart system for identification and quantification of adulterated edible bird's nest (EBN). The smart system was constructed with a colorimetric sensor array (CSA), a smartphone and a multi-layered network model. The CSA were used to collect the odor character of EBN and the response signals of CSA were captured by the smartphone systems. The principal component analysis (PCA) and hierarchical cluster analysis (HAC) were used to inquiry the similarity among authentic and adulterated EBNs. The multi-layered network model was constructed to analyze EBN adulteration. In this model, discrimination of authentic EBN and adulterated EBN was realized using back-propagation neural networks (BPNN) algorithm. Then, another BPNN-based model was developed to identify the type of adulterant in the mixed EBN. Finally, adulterated percentage prediction model for each kind of adulterate EBN was built using partial least square (PLS) method. Results showed that recognition rates of the authentic EBN and adulterated EBN was as high as 90%. The correlation coefficient of percentage prediction model for calibration set was 0.886, and 0.869 for prediction set. The low-cost smart system provides a real-time, nondestructive tool to authenticate EBN for customers and retailers.

Recent developments in gum edible coating applications for fruits and vegetables preservation: A review.

Gums are a class of naturally occurring polysaccharides/carbohydrate polymers derived from renewable sources, which have the capacity to hydrate in water either by forming a gel or stabilizing emulsion systems. Among the substitutes recently considered to replace the application of petroleum-derived polymers against postharvest diseases and shelf life extension, gums and their derivatives have been considered as promising biocontrol products. Polysaccharide gum coatings provide a semipermeable barrier on the surface of produce to reduce respiration rate, weight loss and maintain the nutritional value. Gums have been used as excellent vehicles for active substances, also controlling the speed of diffusion of these, and improving the control of the maturation of fruit and vegetable. Additionally, plant extracts, essential oils, phenolic compounds, and vitamins can be incorporated into polysaccharides edible coatings in order to improve their mechanical barrier, antioxidant and antimicrobial properties. Gums have many advantages over the synthetic polymers, because they have been approved as GRAS by FAO, and their use is safe for the consumer and eco-friendly. This review aims to highlight the most relevant and current information in the use of polysaccharides in postharvest shelf life extension and preservation of overall quality of fruits and vegetables.